Availability: | |
---|---|
Quantity: | |
PY001 云台
BGC2.2 MOS 3.1 2-axis Brushless Gimbal Control Board High Current with Sensor Brushless Gimbal for Racing Drone (actual product does not include camera)
Product name: BGC 3.1 high current 2-axis brushless gimbal control board
Manufacturer number: BGC30P
Product shape: 50*50*10mm
Driving mode: MOS tube
Power supply voltage: 2-4S (7.4-16.8V, 12V recommended)
Power supply voltage: 2-4S (7.4-16.8V, 12V recommended)
Power connector mode: JST and XH
Hardware version: BGC3.1
Firmware version: Russian version BGC2.2
Power connector mode: JST and XH
Hardware version: BGC3.1
Firmware version: Russian version BGC2.2
Supported motors: 2-8 series (from gopro to film and television RED cameras)
Product net weight: 15g including sensor and connecting cable
Note: The gimbal does not include the camera in the photo, this price is for the full set without adjustment!
Performance Parameters |
Use MOS tube to replace L6234D drive motor Peak current 10A (L6234D peak 5A) Can work at 5A for a long time (it is recommended to add a heat sink) Include: 1 x latest BGC 3.0 high current 2-axis brushless gimbal control board 1 x sensor 1 x connecting cable |
BGC 3.1 MOS Large Current Two-axis Brushless Gimbal Controller Driver alexmos Features: |
- Two-axis brushless gimbal driver - Adopts MOS tube drive, with larger current - Support 2-8 series gimbal motor - Peak current 10A -With IIC interface Alexmos 2.0 or 2.2 firmware 【WARNING: Metal and carbon can conductive, pay attention to prevent short circuit.Chips are easily electrostatic breakdown, please do a good job protection before contact!】 |
Package Included: |
- 1* BGC 3.1 Two-axis brushless gimbal driver - 1*Sensor - 1*Cable |
Product PIC.
BGC2.2 MOS 3.1 2-axis Brushless Gimbal Control Board High Current with Sensor Brushless Gimbal for Racing Drone (actual product does not include camera)
Product name: BGC 3.1 high current 2-axis brushless gimbal control board
Manufacturer number: BGC30P
Product shape: 50*50*10mm
Driving mode: MOS tube
Power supply voltage: 2-4S (7.4-16.8V, 12V recommended)
Power supply voltage: 2-4S (7.4-16.8V, 12V recommended)
Power connector mode: JST and XH
Hardware version: BGC3.1
Firmware version: Russian version BGC2.2
Power connector mode: JST and XH
Hardware version: BGC3.1
Firmware version: Russian version BGC2.2
Supported motors: 2-8 series (from gopro to film and television RED cameras)
Product net weight: 15g including sensor and connecting cable
Note: The gimbal does not include the camera in the photo, this price is for the full set without adjustment!
Performance Parameters |
Use MOS tube to replace L6234D drive motor Peak current 10A (L6234D peak 5A) Can work at 5A for a long time (it is recommended to add a heat sink) Include: 1 x latest BGC 3.0 high current 2-axis brushless gimbal control board 1 x sensor 1 x connecting cable |
BGC 3.1 MOS Large Current Two-axis Brushless Gimbal Controller Driver alexmos Features: |
- Two-axis brushless gimbal driver - Adopts MOS tube drive, with larger current - Support 2-8 series gimbal motor - Peak current 10A -With IIC interface Alexmos 2.0 or 2.2 firmware 【WARNING: Metal and carbon can conductive, pay attention to prevent short circuit.Chips are easily electrostatic breakdown, please do a good job protection before contact!】 |
Package Included: |
- 1* BGC 3.1 Two-axis brushless gimbal driver - 1*Sensor - 1*Cable |
Product PIC.